CONVEYORS

4026 Conveyor

  • Capable of handling up to 150-200 TPH.
  • Quick set up time typically under 5 minutes.
  • Mobile unit with towbar and road wheels.
  • High performance hydraulic system.
  • Conveyor Belt: 2 ply x (26" wide
  • Drums outside diameter: 10.75"
  • Drum speed Empty: 105 rpm
  • Drum speed Full: 95 rpm
  • Conveyor Belt Speed Empty: 300 ft/min)
  • Conveyor Belt Speed Full: 280 ft/min
  • Total weight: 4,320 lbs.
  • Width (transport): 2.5m
  • Length (transport): 10.28m
  • Powerunit Diesel Hydraulic with Deutz F3L1011F (35 hp)

5032 Conveyor

  • Capable of handling up to 500 TPH.
  • Quick set up time typically under 5 minutes.
  • Mobile unit with towbar and road wheels
  • High performance hydraulic system.
  • Conveyor Belt: 2 ply x 32" wide
  • Drums outside diameter: 10.75"
  • Drum speed Empty: 105 rpm
  • Drum speed Full: 95 rpm
  • Conveyor Belt Speed Empty: 300 ft/min
  • Conveyor Belt Speed Full: 280 ft/min
  • Total weight (Estimate): 4,850 lbs.
  • Width (transport): 2.5m
  • Length (transport not folded): 51'2"
  • Length (transport folded): 42'7"
  • Powerunit Diesel Hydraulic with Deutz F3L1011F (35hp)

5036 Conveyor

  • Capable of handling up to 780 TPH.
  • Quick set up time typically under 5 minutes.
  • Mobile unit with towbar and road wheels
  • High performance hydraulic system
  • Conveyor Belt: 2 ply x 900mm (36") wide
  • Drums outside diameter: 273mm (10.75")
  • Drum speed Empty: 105 rpm
  • Drum speed Full: 95 rpm
  • Conveyor Belt Speed Empty: 90 m/min (300 ft/min)
  • Conveyor Belt Speed Full: 85 m/min (280 ft/min)
  • Total weight (Estimate): 9,240 lbs. (Diesel)
  • Width (transport): 2.5m
  • Length (transport not folded): 51'2"
  • Length (transport folded): 42'7"
  • Height (stockpiling): 21'4"
  • Powerunit Diesel Hydraulic with Deutz BF4L 1011F (50hp)

M85 Powerstacker

  • Capable of handling up to 600 TPH (670 U.S).
  • Quick set up time typically under 5 minutes.
  • Maximum mobility with fifth wheel, jacking legs, road wheels, brakes and mudguards
  • High performance hydraulic system - Danfoss motors, Commercial control valves
  • Belt Width: 800mm (32")
  • End Drum Centres: 19.8m (65 ft)
  • Tail Drum Diameter: 320mm (12.5") solid
  • Head Drum Diameter: 320mm (12.5") solid-lagged
  • Belt Speed: 163 m/min (534 ft/min) @ 1800 rpm, 197 m/min (647 ft/min) @ 2300 rpm
  • Head Drum RPM: 170 when engine is at 1800 rpm / 206 when engine is at 2300 rpm
  • Total weight: 7718 kg (17000 lbs)
  • Width (transport): 2.5m (8')
  • Length (transport): 13.3m (44')
  • Height (stockpiling): 8.2m (27')
  • Powerunit Cummins B 3.9C 73 Hp (55 kW)

M100 CONVEYOR

  • Capable of handling up to 560 TPH .
  • Quick set up time typically under 5 minutes.
  • Maximum mobility with fifth wheel, jacking legs, road wheels, brakes and mudguards
  • High performance hydraulic system - Danfoss motors, Commercial control valves
  • Belt Width: 32"
  • End Drum Centres: 80ft
  • Tail Drum Diameter: 16"
  • Belt Speed: 450 ft/min
  • Snub Pulley Diameter: 6"
  • Total weight: 19,250 lbs
  • Width (transport): 10'
  • Length (transport): 60'
  • Height (stockpiling): 33'
  • Powerunit Deutz F3L912 47Hp

MD TELESCOPICS

  • SLC 500 PLC System
  • Ten Travel Tires 11R22.5
  • Eight Operation Tires 11R22.5
  • OSHA Compliant
  • 3-Axles with Air Brakes
  • Light Package
  • Quick Electrical Disconnect (Optional)

Operation Dimensions

Inner Radius40'-11"
Belt Width24"
Outer Radius56'-1"
Conveyor Slope-Lower Position4.5"
Retracted Length73' 7"
Conveyor Slope-Raised Position15"
Telescopic Length45' 8"
Design Capacities200,300 and 400 TPH*
Total Length120' 0"
Stockpile DataDrive Data200 TPH300 TPH400 TPH
Based on 37° - angle of reposeMain Conveyor10 HP15 HP20 HP
Height 36'-0"Telescopic Conveyor7 1/2 HP10 HP15 HP
Maximum swing 270 °Hydraulic Power5 HP5 HP5HP
Stockpile capacity 64,000 tonsRadial Drive1.5 HP1.5 HP1.5 HP
Winch2.0 HP2.0 HP2.0 HP

HD TELESCOPICS

  • SLC 500 PLC System
  • Twelve Travel Tires 11R22.5
  • Eight Operation Tires 11R22.5
  • OSHA Compliant
  • 3-Axles with Air Brakes
  • Light Package
  • Quick Electrical Disconnect (Optional)

Operation Dimensions

Inner Radius:46'
Belt Width:36"
Outer Radius:52'-6"
Conveyor Slope-Lower Position:6"
Retracted Length:88'
Conveyor Slope-Raised Position:17"
Telescopic Length:52'
Design Capacities:500,800 and 1000 TPH*
Total Length:140'
Stockpile DataDrive Data500 TPH800 TPH1000 TPH
Based on 37° - angle of reposeMain Conveyor20 HP30 HP40 HP
Height 42'Telescopic Conveyor2X7 1/2 HP2X10 HP2X15 HP
Maximum swing 270 °Hydraulic Power10 HP10 HP10HP
Stockpile capacity 110,000 tonsRadial Drive3HP3 HP3 HP
Winch3HP3 HP3HP
Travel Dimension:Travel Loads:
Height:14'-3"
King Pin:18,300 lbs.
Width:12'-1 1/8"
1st Axle:17,000 lbs.
Length:93'-6"
2nd Axel:17,000 lbs.
King Pin to 1st Axle:61'-1"
King Pin to 2nd Axle:68'-6"

MARCO TELEXTEND

Producers requiring portable stackers or radial stackers longer than 70 or 80 feet have had to use cumbersome and often dangerous top fold or side fold designs. Such equipment is not easily transported and can only offer a fixed stacker length. MARCO'S® unique Telextend(TM) Portable Radial Stacker eliminates all these concerns.

Drive Data200 TPH300 TPH400 TPH
Main Conveyor10 HP15 HP20 HP
Telescopic Conveyor7 1/2 HP10 HP15 HP
Hydraulic Power5 HP5 HP5HP
Operation Dimensions
Inner Radius40'40'40'
Outer Radius46'46'46'
Max Length120'120'120'
Belt Width24"24"24"
Conveyor Slope-Lower Position4.5°4.5°4.5°
Conveyor Slope-Raised Position18°18°18°
Drive Data500 TPH800 TPH1000 TPH
Main Conveyor20 HP30 HP40 HP
Telescopic Conveyor2X7 1/2 HP2X10 HP2X15 HP
Hydraulic Power10 HP10 HP10HP
Operation Dimensions
Inner Radius 46'46'46'
Outer Radius52'-6"52'-6"52'-6"
Max Length140'140'140'
Belt Width36"36"36"
Conveyor Slope-Lower Position6°6°6°
Conveyor Slope-Raised Position17°17°17°

Web Design & Web Development by RCS Web Solutions